Manual Dispenser & Dispensing Components

Manual Dispenser allows you to accurately dispense a material with a control volume with setting of proper pressure and shutoff time comparing with hand dispensing. It comes with different models with low pressure control, digital display for more accuracy and very low pressure control systems which controls more than 2 decimal points.

Cabinet size: 13.3 W x 15.0 H x 15.2 D cm (5.25 W x 5.94 H x 6.00 D") Air input: 80 to 100 psi (5.5 to 6.9 bar) Input voltage: Selectable 100/120/220 VAC Initiate circuits: Foot pedal, finger switch or 5 to 24 VDC signal Dispense time: Programmable from .001 to 99.9 seconds Meets or exceeds CE and CSA standards Warranty: 2 years Note: Specifications and techinal details are subjected to change without prior notification.

Semi-Auto Dispenser

Semi automatic dispenser allows you to program and draw several patterns to your dispensing to improve on the precision accuracy on dispensing and at the same time producing higher out compare to manual dispensing. Hence, this will also prevent any wastage to your material if it is not control during the dispensing.

Various valves selection available for different application

• Rotary Positive Displacement Pump (Auger Screw)
• Piston Pump
• Spray Gun
• Needle valve